Where precision meets durability with every strike, the 6-Piece punch and chisel set is built to handle challenging tasks. This set includes two 8” cold chisels, two center punches and 2 pin punches. Perfect set for any demanding job, these tools ensure reliable and quality performance

F..

Price: $61.50

]]>

Where precision meets durability with every strike, the 6-Piece punch and chisel set is built to handle challenging tasks. This set includes two 8” cold chisels, two center punches and 2 pin punches. Perfect set for any demanding job, these tools ensure reliable and quality performance

F..

Price: $61.50

]]> Where precision meets durability with every strike, the 6-Piece punch and chisel set is built to handle challenging tasks. This set includes two 8” cold chisels, two center punches and 2 pin punches. Perfect set for any demanding job, these tools ensure reliable and quality performance

F..]]> https://chadstoolbox.com/knipex-9k-00-80-177-us-tool-tote/ Thu, 27 Aug 2026 18:10:55 +0000 https://chadstoolbox.com/knipex-9k-00-80-177-us-tool-tote/

Designed for electricians to easily carry all their necessary electrical tools

Features

• 3-Compartment tool tote consists of 25 pockets for tool storage
• Flexible and open tote design allows for access from all sides
• Main compartment accommodates larger tools..

  Price: $88.62

  ]]>

  Designed for electricians to easily carry all their necessary electrical tools

  Features

  • 3-Compartment tool tote consists of 25 pockets for tool storage
  • Flexible and open tote design allows for access from all sides
  • Main compartment accommodates larger tools..

    Price: $88.62

    ]]> Designed for electricians to easily carry all their necessary electrical tools

    Features

    • 3-Compartment tool tote consists of 25 pockets for tool storage
    • Flexible and open tote design allows for access from all sides
    • Main compartment accommodates larger tools..]]> https://chadstoolbox.com/knipex-67-03-140-high-leverage-end-cutting-nippers/ Thu, 27 Aug 2026 18:10:52 +0000 https://chadstoolbox.com/knipex-67-03-140-high-leverage-end-cutting-nippers/

      High leverage cutting edges for cutting soft, hard and piano wire

      Features

      • High cutting capacity with minimal effort due to optimum coordination of cutting edge angle and transmission ratio
      • Cutting edge hardness (approx. 64 HRC)
      • Cutting capacity - up to 5/3..

        Price: $51.03

        ]]>

        High leverage cutting edges for cutting soft, hard and piano wire

        Features

        • High cutting capacity with minimal effort due to optimum coordination of cutting edge angle and transmission ratio
        • Cutting edge hardness (approx. 64 HRC)
        • Cutting capacity - up to 5/3..

          Price: $51.03

          ]]> High leverage cutting edges for cutting soft, hard and piano wire

          Features

          • High cutting capacity with minimal effort due to optimum coordination of cutting edge angle and transmission ratio
          • Cutting edge hardness (approx. 64 HRC)
          • Cutting capacity - up to 5/3..]]> https://chadstoolbox.com/knipex-12-74-180-e01-set-of-spare-blades-for-12-74-180/ Thu, 27 Aug 2026 18:10:51 +0000 https://chadstoolbox.com/knipex-12-74-180-e01-set-of-spare-blades-for-12-74-180/

            Set of spare blades for Automatic Stripping Pliers 12 74 180, incl. screws (models from 2025 to present)

            Features

            • Quick blade change when worn thanks to maintenance-friendly blade unit
            • For stripping flexible supply and extension cables, control and sensor/actuator c..

              Price: $78.29

              ]]>

              Set of spare blades for Automatic Stripping Pliers 12 74 180, incl. screws (models from 2025 to present)

              Features

              • Quick blade change when worn thanks to maintenance-friendly blade unit
              • For stripping flexible supply and extension cables, control and sensor/actuator c..

                Price: $78.29

                ]]> Set of spare blades for Automatic Stripping Pliers 12 74 180, incl. screws (models from 2025 to present)

                Features

                • Quick blade change when worn thanks to maintenance-friendly blade unit
                • For stripping flexible supply and extension cables, control and sensor/actuator c..]]> https://chadstoolbox.com/knipex-12-64-180-e01-set-of-spare-blades-for-12-64-180/ Thu, 27 Aug 2026 18:10:50 +0000 https://chadstoolbox.com/knipex-12-64-180-e01-set-of-spare-blades-for-12-64-180/

                  Set of spare blades for Automatic Stripping Pliers 12 64 180, incl. screws (models from 2025 to present)

                  Features

                  • Quick blade change when worn thanks to maintenance-friendly blade unit
                  • For stripping PVC-insulated flat cables up to max. 12 mm wide

                  Speci..

                  Price: $41.94

                  ]]>

                  Set of spare blades for Automatic Stripping Pliers 12 64 180, incl. screws (models from 2025 to present)

                  Features

                  • Quick blade change when worn thanks to maintenance-friendly blade unit
                  • For stripping PVC-insulated flat cables up to max. 12 mm wide

                  Speci..

                  Price: $41.94

                  ]]> Set of spare blades for Automatic Stripping Pliers 12 64 180, incl. screws (models from 2025 to present)

                  Features

                  • Quick blade change when worn thanks to maintenance-friendly blade unit
                  • For stripping PVC-insulated flat cables up to max. 12 mm wide

                  Speci..]]> https://chadstoolbox.com/knipex-90-20-185-sba-plasticut-flexible-hose-and-pvc-cutter/ Thu, 27 Aug 2026 18:05:42 +0000 https://chadstoolbox.com/knipex-90-20-185-sba-plasticut-flexible-hose-and-pvc-cutter/

                  For cutting thin walled pipes (conduit plastic pipes) and flexible hoses with fabric reinforcement of plastic and rubber up to 1" (25 mm) exterior dia. (not suitable for cutting cables)

                  Features

                  • Opening spring and locking lever
                  • Replacement blades part number 90 29 1..

                    Price: $72.25

                    ]]>

                    For cutting thin walled pipes (conduit plastic pipes) and flexible hoses with fabric reinforcement of plastic and rubber up to 1" (25 mm) exterior dia. (not suitable for cutting cables)

                    Features

                    • Opening spring and locking lever
                    • Replacement blades part number 90 29 1..

                      Price: $72.25

                      ]]> For cutting thin walled pipes (conduit plastic pipes) and flexible hoses with fabric reinforcement of plastic and rubber up to 1" (25 mm) exterior dia. (not suitable for cutting cables)

                      Features

                      • Opening spring and locking lever
                      • Replacement blades part number 90 29 1..]]> https://chadstoolbox.com/knipex-9r-434-150-kus-15-64-x-6-center-punch/ Thu, 27 Aug 2026 18:05:34 +0000 https://chadstoolbox.com/knipex-9r-434-150-kus-15-64-x-6-center-punch/

                        For exact marking of a drill point and guidance of the drill bit

                        Features

                        • Center punches are used to create permanent marks or locations when dissassmbling engine parts
                        • The octagonal shape is easier to grip when striking with a hammer and also prevents the tool from..

                          Price: $11.77

                          ]]>

                          For exact marking of a drill point and guidance of the drill bit

                          Features

                          • Center punches are used to create permanent marks or locations when dissassmbling engine parts
                          • The octagonal shape is easier to grip when striking with a hammer and also prevents the tool from..

                            Price: $11.77

                            ]]> For exact marking of a drill point and guidance of the drill bit

                            Features

                            • Center punches are used to create permanent marks or locations when dissassmbling engine parts
                            • The octagonal shape is easier to grip when striking with a hammer and also prevents the tool from..]]> https://chadstoolbox.com/knipex-90-10-185-sba-pneumatic-hose-cutter/ Thu, 27 Aug 2026 18:05:33 +0000 https://chadstoolbox.com/knipex-90-10-185-sba-pneumatic-hose-cutter/

                              For cutting multilayer and pneumatic hoses up to 3/4" outside diameter

                              Features

                              • Features an opening spring and locking lever
                              • Replaceable blade part number 90 29 01
                              • Not suitable for cutting cables
                              • Wide support base automatically aligns hoses perfect..

                                Price: $82.84

                                ]]>

                                For cutting multilayer and pneumatic hoses up to 3/4" outside diameter

                                Features

                                • Features an opening spring and locking lever
                                • Replaceable blade part number 90 29 01
                                • Not suitable for cutting cables
                                • Wide support base automatically aligns hoses perfect..

                                  Price: $82.84

                                  ]]> For cutting multilayer and pneumatic hoses up to 3/4" outside diameter

                                  Features

                                  • Features an opening spring and locking lever
                                  • Replaceable blade part number 90 29 01
                                  • Not suitable for cutting cables
                                  • Wide support base automatically aligns hoses perfect..]]> https://chadstoolbox.com/knipex-9r-431-120-kus-3-16-x-4-3-4-center-punch/ Thu, 27 Aug 2026 18:05:29 +0000 https://chadstoolbox.com/knipex-9r-431-120-kus-3-16-x-4-3-4-center-punch/

                                    For exact marking of a drill point and guidance of the drill bit

                                    Features

                                    • Center punches are used to create permanent marks or locations when dissassmbling engine parts
                                    • The octagonal shape is easier to grip when striking with a hammer and also prevents the tool from..

                                      Price: $7.80

                                      ]]>

                                      For exact marking of a drill point and guidance of the drill bit

                                      Features

                                      • Center punches are used to create permanent marks or locations when dissassmbling engine parts
                                      • The octagonal shape is easier to grip when striking with a hammer and also prevents the tool from..

                                        Price: $7.80

                                        ]]> For exact marking of a drill point and guidance of the drill bit

                                        Features

                                        • Center punches are used to create permanent marks or locations when dissassmbling engine parts
                                        • The octagonal shape is easier to grip when striking with a hammer and also prevents the tool from..]]> https://chadstoolbox.com/knipex-9r-430-120-kus-5-32-x-4-3-4-center-punch/ Thu, 27 Aug 2026 18:05:24 +0000 https://chadstoolbox.com/knipex-9r-430-120-kus-5-32-x-4-3-4-center-punch/

                                          For exact marking of a drill point and guidance of the drill bit

                                          Features

                                          • Center punches are used to create permanent marks or locations when dissassmbling engine parts
                                          • The octagonal shape is easier to grip when striking with a hammer and also prevents the tool from..

                                            Price: $7.80

                                            ]]>

                                            For exact marking of a drill point and guidance of the drill bit

                                            Features

                                            • Center punches are used to create permanent marks or locations when dissassmbling engine parts
                                            • The octagonal shape is easier to grip when striking with a hammer and also prevents the tool from..

                                              Price: $7.80

                                              ]]> For exact marking of a drill point and guidance of the drill bit

                                              Features

                                              • Center punches are used to create permanent marks or locations when dissassmbling engine parts
                                              • The octagonal shape is easier to grip when striking with a hammer and also prevents the tool from..]]>